秒速飞艇官方开奖号码

ROBERTS 6280 is an acrylic pressure sensitive adhesive with good plasticizer migration resistance. It may be used as a releasable/re-positionable adhesive or as a permanent installation, if flooring is installed while adhesive is still wet.

Available Sizes:
R6280-4 – 4 gallon Plastic Pail
R6280-1 – 1 gallon Plastic Pail
R6280-0 – 1 quart Plastic Pail

ROBERTS 6300 is a high performance pressure sensitive adhesive which may be used to install carpet tiles, commercial carpet cushion, fiberglass reinforced sheet vinyl, luxury vinyl tiles and heterogeneous sheet vinyl and tile. This product dries quickly and offers a high shear strength making it the adhesive of choice for commercial installations where performance is key.

Available Sizes:
R6300-4 – 4 gallon Plastic Pail
R6300-1 – 1 gallon Plastic Pail

ROBERTS Air Glider is built with a 1.75HP, 120V blower motor, and can lift up to 750 lbs. Using hovercraft lifting principles, the glider is simple to use and virtually eliminates the risk of back injury. A single user can easily move commercial, industrial and residential equipment, machinery and appliances without damaging floors.

ROBERTS Base Board Molding Pry Bar and Lifter is the perfect tool to remove molding. A must-have tool for floor installers, its curved design provides the precise angles and optimal leverage you need to effectively pull base molding and tack strip, especially in places where a large pry bar won’t work. Manufactured from high carbon forged steel with bright nickel plating, its upgraded deep bevel nail slots ensure easy, quick removal. This versatile tool is 10-1/2 in. long and built to last – yet small enough to fit in your toolbox.

ROBERTS 1406 Tongue & Groove Flooring Adhesive is a high strength PVA adhesive with a specialized applicator tip for precise placement of the adhesive.


Available Sizes:
1406-P – 1 pint Plastic Bottle

ROBERTS 5015 is an adhesive with a strong initial grab to hold carpet pads in place quickly. It's a superior adhesive developed for the adherence of carpet pads prior to the installation of stretch-in carpet.

Available Sizes:
R5015-1 – 1 gallon Metal Can

ROBERTS 1650 MAXCOMPLETE-EZ Hybrid Polyurethane Adhesive is a powerful adhesive manufactured for the installation of engineered wood, solid wood and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood, providing a moisture vapor barrier, and a sound reduction layer. This is a low odor, ZERO VOC, and LEED compliant adhesive. After 8 hours curing time, the floor is ready for light foot traffic.

Available Sizes:
1650-2 - 2 gallon Plastic Pail

ROBERTS 5505 Urethane Adhesive Remover is a superior cleaner to aid in the removal of fresh and dried adhesive from flooring surfaces and tools. Also available as wipes

Available Sizes:
R5505 – 24 ounce Plastic Bottle

ROBERTS 8100 Superior Adhesive Remover is a ready-to-use, professional strength cleaner for the speedy removal of adhesives and carpet seam sealers. This fast acting cleaner is clear in color, and has the ability to remove wet adhesives without a trace. This remover may be used in commercial or residential spaces.

Available Sizes:
R8100-24 – 24 ounce Plastic Bottle

Available Tape Size:
1-7/8" x 100' roll (12/cs) - 50-040

ROBERTS 1030 is a solvent-free, brush-grade, latex-based contact cement. It may be used to bond a wide variety of surfaces and offers a high strength, heat resistant bond. Finished assemblies can be used immediately.

Available Sizes:
R1030-1 – 1 gallon Plastic Pail

The ROBERTS 25" Pro Flooring Cutter is a guillotine-style cutter manufactured to cut precise, clean-edges on all types of flooring materials. The large cutting table stabilizes longer planks while the extendible handle provides extra leverage for more cutting power. This extra power is great not only for cutting laminate and engineered wood but also for cutting a variety of other flooring materials such as carpet tile, vinyl flooring, vinyl siding, VCT tiles, rubber, foam and more.

Looking for Replacement Blades? Click Here

ROBERTS 7500 Vinyl Seam Sealer is a strong and durable seaming adhesive designed to economically seal seams in sheet flooring. It is a non-flammable, solvent-free vinyl seam sealer designed to save time and cost, compared to heat welding on commercial vinyl applications.

Available Sizes:
7500-8 - 8 ounce Plastic Bottle

3/4" Fluted Masonry Nails (5 lb. Bag) (10/cs)

1-1/4" Elasticel (Acoustical) Nails (5 lb. Bag) (10/cs)

Available Nail Sizes:
36-114 - 1-1/4" Drive Screw Nails Unichrome, with 3/16" Nail Head (1 lb. Bag) (50/cs)
37-114 - 1-1/4" Drive Screw Nails Brass, with 3/16" Nail Head (1 lb. Bag) (50/cs)

The Pro Carpet Knee Pads are a must-have for any installer.

ROBERTS heavy duty carpet blades are constructed of high quality steel, yielding clean and professional results. These precision sharpened blades deliver sharp, clean and fast cuts. Round corner blades help prevent cutting beneath the carpet and run along the subfloor without damaging it. ROBERTS carpet blades fit most, if not all, standard carpet knives. Replacing a carpet knife's blade helps maintain optimal cutting performance.

Available Blade Packs:
10-490 - (10-Pack) Round-End Carpet Blades
10-491 - (100-Pack) Round-End Carpet Blades w/ Quick Blade Dispenser

ROBERTS heavy duty carpet blades are constructed of high quality steel, yielding clean and professional results. These precision sharpened blades deliver sharp, clean and fast cuts. Round corner blades help prevent cutting beneath the carpet and run along the subfloor without damaging it. ROBERTS carpet blades fit most, if not all, standard carpet knives. Replacing a carpet knife's blade helps maintain optimal cutting performance.

Available Blade Packs:
10-492 - (10-Pack) Square-End Carpet Blades
10-493 - (100-Pack) Square-End Carpet Blades w/ Quick Blade Dispenser

The ROBERTS VCT Seam Roller is essential to complete any vinyl composition tile (VCT) and sheet vinyl flooring installation, and is suitable for wall base installations. The polished steel roller smoothly glides on 2 ball bearings for an even finish. The angled soft grip handle is designed for superior grip and better leverage. The 10-960 seam roller is 8 in. long and weighs approximately 2 lbs. 2 oz.

The ROBERTS Patent Pending Dual Expansion Joint Spacer is the only spacer you'll need for your floating and glue down vinyl, laminate and hardwood flooring jobs. Not only do they space out 1/4 in. and 1/2 in. expansion gaps, these spacers also form 1 in. thresholds. Expansion joints and thresholds leave a perimeter around your plank floors for expanding and contracting without buckling, increasing the longevity of your installation. This all in one spacer makes custom flooring jobs easy and won't tip over during installation.

Install vinyl, laminate and hardwood flooring like a professional with the ROBERTS Pro Flooring Installation Kit. This kit includes a tapping block, pull bar, double faced mallet and 30 expansion joint spacers that won't tip over during installation. This kit is reusable for future wood and vinyl flooring projects.

Maximize your utility knife performance with the ROBERTS Hawk Utility Blade. This blade is constructed of high performance SK2 steel, the same material used in power saw blades and drill bits, so it will stand up to everyday cutting and trimming. With the fine point, this blade will make precise cuts more comfortably than standard utility knife blades. This concave hook blade cuts acrylic light panels, LVP, vinyl tile, rubber and flooring underlayment.

Replacement blades for ROBERTS Knives:
10-221 Pro Utility Knife
10-920-6 Professional Fixed Blade Utility Knife
10-218F Big Fatso Multipurpose Knife with Quick Blade Change

ROBERTS 9707 MULTIGRIP Web Spray Adhesive is an extremely versatile, quick-bonding and strong holding aerosol adhesive to be used on a wide array of substrates. Its aggressive tack offers high initial grab along with sufficient open time to properly position materials. ROBERTS 9707 MULTIGRIP delivers professional strength for demanding applications, permanent bonds and temporary/repositionable bonds. The formula dries clear and resists turning yellow, making it reliable for crafting. This web spray adhesive is easy to use, resists soaking in to applied surfaces and resists running when applied in vertical applications.

Available Size:
9707-17 - 17 oz. Can

ROBERTS Big Fatso Multipurpose Knife with Swing-Open Handle for Quick Blade Change is specially manufactured for a wide variety of utility purposes. From trimming excess material to cutting twine, cord and packing materials, this is an all-around great knife to have in your tool box. More robust than a standard knife, it is made of die-cast aluminum for durability, and designed with an ergonomic handle that fits in the palm of the hand to provide a firm and comfortable grip. Convenient swing-open handle provides quick and easy blade changing, and locks blades in place. Safe and effective, it includes three utility blades.

ROBERTS 3087 Multipurpose is a high performance, high-solids and commercial-grade adhesive. 3087 is developed for the direct and double glue down installations of most carpet, including Axminster-backed carpet. This adhesive offers excellent working time, making it ideal for patterned carpets, felt-back sheet goods and unfinished cork underlayment. This fast-grabbing formula accepts light traffic over flooring before the adhesive is fully cured. Once dry, this multipurpose adhesive offers a very strong bond, which is great for holding pattern carpets in place.

ROBERTS 1530 MAXGRAB Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. This adhesive has low odor, is LEED EQc 4.1 Compliant and has VOC less than 60. It has a curing time of approximately 6 to 8 hours for light foot traffic, and is easy to clean off by using ROBERTS 5505 Urethane / Multipurpose Adhesive Remover.

Available Sizes:
1530-4 - 4 gallon Metal Pail

ROBERTS 7399 Universal Plus Flooring Adhesive is an Ultimate-grade, high solids formulation with a tremendous bond and excellent moisture and plasticizer migration resistance. 7399 is approved for several flooring types, backings and substrates, making it a versatile solution to keep on hand. This adhesive may be applied as a permanent or as a true, pressure sensitive adhesive. The pressure sensitive application offers an extended open time, depending on the flooring type.


Available Sizes:
7399-4 – 4 gallon Plastic Pail
7399-1 – 1 gallon Plastic Pail

ROBERTS®8600 NOSEBONDTM is an advanced acrylic adhesive specially formulated for interior stair nose installation on wood, laminate, and rigid PVC properly prepared subfloors. This water-resistant adhesive featuring GoldGuard® antimicrobial product protection is
manufactured for interior use only, and ideal for wood moldings, wood trim installations and repairs. Low odor, enviro-friendly, solvent-FREE, and LED compliant with a VOC > 2 g/L, it has a curing time of 8 to 10 hours. It is easy to clean up with warm, soapy water when fresh, and with mineral spirits when dried.

Available Sizes:
8600-10C - 10 oz. cartridge (295 mL)

ROBERTS 1550 MAXCOMPLETE Polyurethane Adhesive is manufactured for the installation of engineered wood, solid wood, parquet, and bamboo flooring. Formulated to bond with concrete, plywood, and cement board, this moisture-cured polyurethane adhesive is highly elastomeric, allowing it to adapt to the natural expansion and contraction of wood. It can be applied with a 1/4 in. Flat V-Notch trowel when moisture mitigation is NOT necessary and with a 1/4 in. x 3/16 in. Tiger Tooth trowel for moisture mitigation purposes. It covers approximately 30-35 sq. ft. per gallon with a curing time of approximately 6 to 8 hours for light foot traffic when applied with adhesive- only trowel, and 12 hours when applied with moisture-control trowel. Can be sanded after 18 hours. This adhesive has low odor, is LEED EQC 4.1 Compliant and VOC less than 60. It is easy to clean off by using ROBERTS 5505 Urethane Adhesive Remover.

Available Sizes:
1550-4 - 4 gallon Metal Pail

ROBERTS 2310 RESILIENT Fiberglass-Backed Sheey Vinyl Adhesive is formulated with the desired tack and flexible working time to install fiberglass sheet viny;, small-format luxury vinyal tile (up to 12 x 12) and modular carpet tiles in residential-to-light-commericial applications


Available Sizes:
2310-4 – 4 gallon Plastic Pail (15.14 L)
2310-1 – 1 gallon Plastic Pail (3.78 L)

The ROBERTS Floor and Wall Scraper removes tough materials like stubborn glue and flooring, leaving surfaces smooth and prepped. The 18 in. handle was crafted with a cushioned grip and an ergonomic, ball cap at the end for more comfortable scraping, because tough jobs don’t need to be tough on the body. This scraper includes 1 high speed carbon steel blade that maintains a sharp edge.

4” Floor/Wall Scraper Replacement Blades Available:
10-442-10 (10 pcs.) (10/cs)
10-459 (40 pcs.) (10/cs)

ROBERTS 6030 is a professional-grade, solvent-based adhesive for the installation of most types of outdoor carpets and artificial turf. This adhesive develops a strong initial grab to hold carpets in place, and resists all types of weather conditions for a strong long-term bond.

Available Sizes:
R6030-4 – 4 gallon Metal Pail
R6030-1 – 1 gallon Metal Can

ROBERTS 2001 is a superior, commercial-grade, felt-backed sheet vinyl adhesive. This adhesive was developed with the optimum open time and working time for the positioning of felt-backed sheet vinyl flooring. This adhesive is for residential and moderate commercial traffic and has a lifetime non-staining warranty.

Available Sizes:
2001-4 – 4 gallon Plastic Pail
2001-1 – 1 gallon Plastic Pail
2001-0 – 1 quart Plastic Pail

ROBERTS 6040 is a superior-grade carpet adhesive developed for exterior installations of most types of outdoor commercial carpets and artificial turf.

Available Sizes:
6040-4 – 4 gallon Metal Pail

ROBERTS 2057 is a premium, clear thin spread adhesive designed for the installation of vinyl composition tile (VCT).

Available Sizes:
2057-4 – 4 gallon Plastic Pail
2057-1 – 1 gallon Plastic Pail
2057-0 – 1 quart Plastic Pail

The ROBERTS 5 in. Carpet Seam Roller was designed to seam loop pile carpets. It hides the carpet seam by bringing the fibers together to show as little seam as possible. The steel, star wheel rollers also improve the transfer of hot-melt tape adhesive into the carpet for a stronger seam. The extra-wide head results in a better pile transition over the seam.

ROBERTS Deluxe Seam Roller is the perfect tool to professionally finish even the most demanding carpet seams. Specially designed to seam loop pile carpet, its extra wide 4-1/2 in. rollers reduce seam peaking, and maximize adhesive absorption to ensure strong, long-lasting seams. It is great to work on long join seams, and because it is lightweight, it puts no pressure on your wrist while rolling the joins, minimizing user fatigue. Its wide, nonslip handle makes the roller easy to use. This is the Pro installers must-have tool.

ROBERTS 7200 Wall Base Adhesive is a superior grade, solvent free and zero Volatile Organic Compound (VOC) product with excellent holding power and great wet suction. This acrylic base formula is non-staining for easy cleanup, features a strong initial grab for fast installation and is odorless when dry. This adhesive meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point as a low emitting adhesive.


Available Sizes:
7200-4 – 4 gallon Plastic Pail
7200-1 – 1 gallon Plastic Pail
7200-30C – 30 ounce Tube
7200-11C – 10 ounce Tube

The Roberts 4" Cut Pile Seam Roller safely seams cut-pile and Saxony carpets, as well as vinyl flooring. The smooth roller head forces the carpet backing into seaming tape without fraying the yarn ends.

The Roberts Conventional Carpet Trimmer neatly trims carpet at the wall and under toe kicks. The anti-slip, 5-position handle moves easily in tight areas.

Looking for replacement blades? Click here

ROBERTS 1407 Engineered Wood Flooring Adhesive is an acrylic urethane adhesive designed for the installation of engineered and parquet wood flooring up to 1/2 in. thick and 5 in. wide. This solvent-free adhesive meets the strict requirements of the South Coast Air Quality Management District and may contribute one LEED point for "Low-Emitting Material-Adhesive and Sealant" (IEQ Credit 4.1). The 1407 holds trowel ridges for optimum wood contact, grants excellent working time, and cleans up easily with soap and water. This low VOC, environmentally friendly formulation is low odor and odorless when dry.


Available Sizes:
1407-4 – 4 gallon Plastic Pail
1407-1 – 1 gallon Plastic Pail
1407-30C – 30 ounce Cartridge

The Roberts Golden Touch Carpet Trimmer trims carpet precisely at the wall and under toe kicks. Equipped with a dual spring steel blade clip to fully secure blades in place and prevent loosening over time. Classic, thinner handle for comfort and easy maneuvering when cutting.

Looking for replacement blades? Click here

ROBERTS 6700 adhesive was designed for exterior or interior carpet installation and is solvent-free for reduced health risks, a lower environmental footprint and high initial grab. This non-flammable adhesive may be used in areas where flammable adhesives pose a health risk due to fumes or flashback fires. Use this adhesive to adhere most indoor/outdoor carpets with polypropylene, rubber-backed (foam, marine, waffle), urethane and tufted, woven or non-woven/needle-bond backings. For best results, keep in mind that high temperature and low humidity will cause the adhesive to cure faster.

Available Sizes:
6700-4 – 4 gallon Plastic Pail
6700-1 – 1 gallon Plastic Pail
6700-0 – 1 quart Plastic Pail

This Multi-Purpose Wall Trimmer is great for cutting conventional carpet, plus soft vinyl sheet goods, carpet tiles and cushion back for glue down carpets. The anti slip handle moves easily in tight areas.

Looking for replacement blades? Multi-Purpose Wall Trimmer uses Hooked Blades and Heavy Duty Slotted Blades

ROBERTS 7350 UNIVERSAL Flooring Adhesive is a high quality, high solids, cross-linking formulation designed specifically for installing luxury/solid vinyl tiles and planks. This powerhouse adhesive is ideal for use with large format vinyl tiles. Can also be used to adhere carpet tiles and specialty vinyl flooring underlayment, such as ROBERTS Cork Pro Plus, to the subfloor.


Available Sizes:
7350-4 – 4 gallon Plastic Pail
7350-1 – 1 gallon Plastic Pail
7350-0 – 1 quart Plastic Pail

Efficiently cut most loop carpet of all thicknesses with the ROBERTS Loop Pile Cutter. The 2-blade design accommodates both left and right positions for cutting closer to the yarn edge. This carpet cutter features a comfortable cutting angle and easy blade insertion.

Looking for replacement blades? Click here

The Roberts Loop Pile Cutter is designed to efficiently cut most loop carpet regardless of thickness. The unique two-blade design accommodates both left and right positions for cutting closer to the yarn edge.

Looking for replacement blades? Click here

ROBERTS 3500 is a direct glue down carpet adhesive recommended for residential to light commercial traffic. Its extended open time allows plenty of time to install carpet and is also great for dry, non-humid regions where a longer open time is necessary.

Available Sizes:
3500-4 – 4 gallon Plastic Pail